Alcatel-Lucent 7450 Quality Of Service Manual page 110

Ethernet service switch; service router; extensible routing system

Hide thumbs Also See for 7450:

Table of Contents

Network QoS Policy Command Reference

match [next-header next-header]

config>qos>network>ingress>ipv6-criteria>entry

This command creates a context to configure match criteria for a network QoS policy match IPv6

criteria. When the match criteria have been satisfied the action associated with the match criteria is

If more than one match criteria (within one match statement) are configured, then all criteria must be

satisfied (AND function) before the action associated with the match is executed.

A match context can consist of multiple match criteria, but multiple match statements cannot be

entered per entry.

It is possible that a network ingress policy includes the dscp map command, the dot1p map command,

and an IPv6 match criteria. When multiple matches occur for the traffic, the order of precedence is used

to arrive at the final action. The order of precedence is as follows:

The no form of this command removes the match criteria for the entry-id.

Table 20: Protocol ID descriptions (Continued)

IP Quintuple

Ethernet-within-IP Encapsulation

Encapsulation Header

PNNI over IP

Protocol Independent Multicast

Virtual Router Redundancy Protocol

Layer Two Tunneling Protocol

Schedule Transfer Protocol

Performance Transparency Protocol

ISIS over IPv4

Combat Radio Transport Protocol

Combat Radio User Datagram

Quality of Service Guide