Service Management Tasks
...
----------------------------------------------
A:ALA-7>config>service#
Editing QoS Policies
You can change QoS existing policies and entries. The changes are applied immediately to
all services where this policy is applied. To prevent configuration errors copy the policy to a
work area, make the edits, and then write over the original policy.
Copying and Overwriting QoS Policies
You can copy an existing service egress or ingress policy, rename it with a new policy ID
value, or overwrite an existing policy ID. The overwrite option must be specified or an error
occurs if the destination policy ID exists.
CLI Syntax:
The following output displays the copied policies:
A:ALA-7>config>qos# info
---------------------------------------------
...
exit
...
220
exit
config>qos# copy {sap-ingress | sap-egress} source-
policy-id dest-policy-id [overwrite]
sap-ingress 100 create
description "Used on VPN sap"
queue 1 create
exit
queue 2 multipoint create
exit
queue 10 create
parent "VPN_be"
rate 11000
exit
sap-ingress 101 create
description "Used on VPN sap"
queue 1 create
exit
queue 2 multipoint create
exit
queue 10 create
parent "VPN_be"
rate 11000
exit
sap-ingress 200 create
Quality of Service Guide