Mda (Fp1) - Alcatel-Lucent 7450 Quality Of Service Manual

MDA (FP1)

The following CLI syntax examples can be used to remove slope policies from MDAs:
CLI Syntax:
For the MC Path Mgmt, the mcast-pool can be removed from the bandwidth policy or the
bandwidth-policy can be removed from under the MDA ingress multicast-path-management.
CLI Syntax:
The following CLI syntax example configures the PPP multilink pool:
CLI Syntax:
FP (FP2 and higher based hardware)
The following CLI syntax examples can be used to remove slope policies from FP pools:
CLI Syntax:
Although some commands are applied under the MDA CLI tree, the policy is applied to the
FP. If different policies are applied to each MDA, the last policy applied take precedence.
For the MC Path Mgmt, the mcast-pool can be removed from the bandwidth policy or the
bandwidth-policy can be removed from under the FP ingress multicast-path-management.
CLI Syntax:
Quality of Service Guide
config>card>mda>access>ingress>pool# no slope-policy
name
config>card>mda>access>egress>pool# no slope-policy name
config>card>mda>network>egress>pool# no slope-policy
name
config>mcast-mgmt>bw-plcy# no mcast-pool
config>card>mda>ingress>mcast-mgmt# no bandwidth-policy
config>card>mda>access>egress>pool# no slope-policy name
config>card>mda>access>ingress>pool# no slope-policy
name
config>card>mda>access>egress>pool# no slope-policy name
config>card>mda>network>ingress>pool# no slope-policy
name
config>card>mda>network>egress>pool# no slope-policy
name
config>mcast-mgmt>bw-plcy# no mcast-pool
config>card>fp>ingress>mcast-mgmt# no bandwidth-policy
Slope QoS Policies
627