Alcatel-Lucent 7450 Quality Of Service Manual page 712

ATM QoS Policy Command Reference
Sample Output
A:ALA-48>config>service>ies# show service sap-using sap 1/3/2:244/1
===============================================================================
Service Access Points Using Port 1/3/2:15990785
===============================================================================
PortId
-------------------------------------------------------------------------------
1/3/2:244/1
-------------------------------------------------------------------------------
Number of SAPs : 1
-------------------------------------------------------------------------------
===============================================================================
A:ALA-48>config>service>ies#
port
Syntax port [port-id] atm
port [port-id] atm connections
port [port-id] atm interface-connections
port [port-id] atm pvc
port [port-id] atm pvp
port [port-id] atm pvt
Context show
Description This command displays port or channel information.
Parameters port-id — Specifies the physical port ID.
714
Label
Port ID
Svc ID
SapMTU
I.QoS
I.MAC/IP
E.QoS
E.Mac/IP
A.Pol
Adm
Opr
Table 57: SAP Output Fields
Description
The ID of the access port where the SAP is defined.
The service identifier.
The SAP MTU value.
The SAP ingress QoS policy number specified on the ingress SAP.
The MAC or IP filter policy ID applied to the ingress SAP.
The SAP egress QoS policy number specified on the egress SAP.
The MAC or IP filter policy ID applied to the egress SAP.
The accounting policy ID assigned to the SAP.
The desired state of the SAP.
The actual state of the SAP.
SvcId I.QoS I.Fltr E.QoS E.Fltr A.Pol
89 1 none
Adm
1 none none Up
Quality of Service Guide
Opr
Down