Alcatel-Lucent 7450 Quality Of Service Manual page 696

Overview
VPLS SAPs
Use the following CLI syntax to apply ATM QoS traffic descriptor profile policies to VPLS
SAPs on ingress and egress.
CLI Syntax:
Default ATM-TD-Profile Policy Values
The default ATM QoS traffic descriptor profile is identified as default. The default profile
cannot be edited or deleted. The following displays default profile parameters:
The following output displays the default configuration:
A:ALA-48>config>qos# info detail
...
#------------------------------------------
echo "QoS Slope/Queue Policies Configuration"
#------------------------------------------
698
config>service>vpls>sap# atm
egress
traffic-desc traffic-desc-profile-id
ingress
traffic-desc traffic-desc-profile-id
Field
atm-td-profile traffic-desc-profile-id
description
service-category
traffic
policing
clp-tagging
descriptor-type
shaping
atm-td-profile 1 create
description "Default Traffic Descriptor"
service-category ubr
no traffic
no policing
no clp-tagging
Table 49: ATM-TD-Profile Defaults
Default
1
"Default Traffic Descriptor"
ubr
no traffic
no policing
no clp-tagging
P0_1
no shaping
Quality of Service Guide