Applying Network Queue Policies
Apply network queue policies to the following entities:
•
Ethernet Ports
Use the following CLI syntax to apply a network queue policy to an Ethernet port:
CLI Syntax: config>port#
The following output displays the port configuration.
#--------------------------------------------------
echo "Port Configuration"
#--------------------------------------------------
port 1/1/1
exit
7210 SAS-E OS Quality of Service Guide
Ethernet Ports
ethernet
access
uplink
ethernet
mode access uplink
access
uplink
queue-policy "nq1-cbs"
exit
exit
exit
no shutdown
Network Queue QoS Policies
Page 93