Administration > Diagnostics; Administration > Factory Defaults; Status - Cisco WRP500 Administration Manual

Status

R E V I E W D R A F T # 1 — C I S C O C O N F I D E N T I A L
Administration > Diagnostics
Ping Test
IP or URL Address
Packet Size
Times to Ping
Traceroute Test
IP or URL Address
Detect Active LAN Client(s)
Search Time
Administration > Factory Defaults
Restore Router Factory Defaults
Restore Voice Factory Defaults

Status

The Status module includes the following pages:
•
•
•
•
Cisco WRP500 Administration Guide
B-26
The address of the PC whose connection you wish to
test.
The packet size you want to use.
Default: 32 bytes
The number of times to run the ping test.
The address of the PC whose connection you wish to
test.
The duration of the search in seconds: 5, 10, or 15.
"Status > Router" on page 27
"Status > Mobile Network" on page 27
"Status > Local Network" on page 28
"Status > Wireless Network" on page 28
To reset the router settings to the default values, select
Yes. Then click Save Settings. Any custom router
settings you have saved will be lost when the default
settings are restored.
To reset the voice settings to the default values, select
Yes. Then click Save Settings. Any custom Voice
settings you have saved will be lost when the default
settings are restored.
Appendix B Data Fields