Interface Availability On Interface Modules - Cisco ASR-920-24SZ-IM Installation Manual

Cisco ASR 920 Series Routers Features
•
•
•
•

Interface Availability on Interface Modules

Cisco ASR-920-24SZ-IM Router does not support over-subscription mode. You must disable the ports
Note
as appropriate to restrict the system usage to 64 Gbps. Enabling all the interfaces in over-subscription
mode can result in an unpredictable system performance.
The following table provides a snapshot of the interfaces available on supported interface modules:
Table 1-2 Interface Availability on Supported Interface Modules
Interface Module Quantity Interfaces in Resulting System
None 0
A900-IMA8T 1
A900-IMA2Z 1
A900-IMA1X 1
A900-IMA8D 1
Cisco ASR-920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Aggregation Services Router Hardware Installation Guide
1-6
For more information about installing a 8 Port T1/E1 interface module, see the
Interface Module" section on page
To determine interfaces available on the 8 Port T1/E1 interface module, see the
Availability on Interface Modules" section on page
For LED indicator information on the 8 Port T1/E1 interface module, see the
Module LEDs" section on page
For RJ45C pinout information on the 8 Port T1/E1 interface module, see the
section on page 5-5.
Cu SFP 10GE T1/E1 OC3/
0 24 4 0
8 16 4 0
0 24 6 0
0 24 5 0
0 20 4 8
3-19.
1-6.
1-15.
System
Oversubscribed
DS3
OC12 /E3
0 0
0 0 No
0 0 Yes
0 0 Yes
0 0 No
Chapter 1 Overview
"Installing the
"Interface
"8 T1/E1 Interface
"RJ45C Port Pinouts"
Front Panel
Ports Disabled
16 to 23
20 to 23