Table of Contents
Advertisement
CONFIGURE
Scan Reference Station
Config...\Interfaces... - Controlling Devices
Description of columns
Column
Description
Stn ID
Station ID of available reference stations from which a signal is being
received.
For radios, the reference station radios transmitting on the same channel
will be listed.
Latency (s)
Time delay, in seconds and configured on the reference, from when the
reference collects the data to when the data is transmitted.
Data Format
Format of the data from the reference station. Refer to "22.3.3 Configura-
tion of a Reference Real-Time Interface" for more information about data
formats.
CONT (F1)
CH- (F2) and CH+ (F3)
GPS1200+
To select the highlighted reference station and
to continue with the subsequent screen.
Available for scanning reference stations with
radios attached. To switch the radio to one
channel lower/higher than the current channel.
The reference stations displayed change to
those broadcasting on the new channel.
622
Advertisement
Table of Contents
