Table of Contents
Advertisement
COGO
Step
Description
Pressing PAGE (F6) twice changes to the Plot page.
Both COGO points and known points are displayed.
SHIFT QUIT (F6) does not store the COGO points and exits COGO
calculations.
RSLT1 (F3) or RSLT2 (F3) to view the first and second result.
4.
COGO Brng - Dist Results, Result1 page
Is the first result to be stored?
•
If yes, STORE (F1) to store the result and activate the Result2
page. For <Write Logfile: Yes> in COGO Configuration, Logfile
page the result is written to the logfile.
•
If no, RSLT2 (F3) to activate the Result2 page.
5.
COGO Brng - Dist Results, Result2 page
Repeat step 3.
6.
COGO Brng - Dist Results, Result2 page
Is the second result to be stored?
•
If yes, STORE (F1) to store the result and return to COGO Inter-
section Input, Input page. For <Write Logfile: Yes> in COGO
Configuration, Logfile page the result is written to the logfile.
•
If no, ESC does not store the COGO point and returns to COGO
Intersection Input, Input page.
7.
Are more COGO intersection calculations to be done?
GPS1200+
33.6
844
Advertisement
Table of Contents
