Table of Contents
Advertisement
CONFIGURE
NMEA Output
Config...\Interfaces... - General
Description of fields
Field
Option
<Output
Yes or No
NMEA:>
<Port:>
Bluetooth x
NETx
Port x
Port 1
CONT (F1)
MESGS (F2)
DEVCE (F5)
Description
Activates the output of NMEA.
Available for RX1250. The Bluetooth port which will
be used for the interface functionality.
Available for an activated Internet interface. If these
ports are not assigned to a specific interface, then
these ports are additional remote ports.
The physical port P1, P2 or P3 on the instrument to
which the device is attached.
Available for RX1250. LEMO port on RX1250.
GPS1200+
To accept changes and return to the screen
from where this screen was accessed.
To configure what NMEA messages are
output, the rates and the output timing method.
Refer to paragraph "CONFIGURE NMEA
Messages".
Available unless <Port: NETx>. To create,
select, edit or delete a device. Refer to "23.2
Accessing CONFIGURE Devices /
CONFIGURE GPRS Internet Devices".
529
Advertisement
Table of Contents
