Table of Contents
Advertisement
COGO line calculation
segmentation step-by-
step
COGO
d1
d1
P0
GPS12_145
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step
Description
1.
Refer to "38.2 Accessing COGO" to access COGO Line Calculation
Input.
COGO Line Calculations Input, Input page
SHIFT CONF (F2) to configure the COGO application program.
2.
COGO Line Calculations Input, Input page
<Task: Segmentation>
3.
CALC (F1) to access COGO Define Segmentation.
4.
COGO Define Segmentation
<Method:> How the line is to be divided. Refer to paragraph
"Diagram". Depending on the selection, the following fields are user
input or output fields.
<Line Length:> Calculated line length between the selected <Start
Point:> and <End Point:>.
Line divided by <Method: Segment Length>
d1
d2
P1
P0 <Start Point:>
P1 <End Point:>
d1
d2
GPS1200+
<Seg Length:>
Remaining segment
Refer to
chapter
38.3
38.7.1
868
Advertisement
Table of Contents
