Table of Contents
Advertisement
DET C SYS
Configuration,
Onestep page
Determine Coordinate System - General
Field
Option
<Default
Orthometric or
Height Mode:>
Ellipsoidal
Next step
PAGE (F6) changes to the Onestep page. Refer to paragraph "DET C SYS Configuration,
Onestep page".
Description of fields
Field
Option
<Default Rota-
tion:>
Use WGS84 North Rotate to North as defined by WGS 1984.
User Entered
Convergnce
Angle
Two WGS84
Points
<Default
Height SF:>
Description
The default height mode to be used when deter-
mining the coordinate system.
Description
The default rotation method to be used in the trans-
formation process.
Rotation can be manually typed in.
Angle between grid North and geodetic North at a
certain point. Refer to "41.2 Determine Coordinate
System - Onestep Transformation" paragraph "DET
C SYS Step 4: Determine Rotation" for a diagram.
Rotation defined by two points on the WGS 1984
datum. Refer to "41.2 Determine Coordinate System
- Onestep Transformation" paragraph "DET C SYS
Step 4: Determine Rotation" for a diagram.
The default method for determining the height scale
factor to be used in the transformation process.
GPS1200+
955
Advertisement
Table of Contents
