Table of Contents
Advertisement
Reference Line
Field
Option
<D Ht:>
User input
<3DCQ:>
Output
<PDOP:>
Output
For <Stake Mode: Polar>
Description of fields
Field
Option
<DIRC:>
Output
<DIST:>
Output
Description
Available for <Edit Height: Yes> in REFLINE
Configuration, Heights page.
The design height, which is the orthometric height of
the point to be staked, is displayed. If the orthometric
height cannot be displayed, the local ellipsoidal
height is displayed. If it is not possible to display the
local ellipsoidal height, the WGS 1984 height is
displayed.
Changing the value for <D Ht:> changes the values
displayed for <CUT:> and <FILL:>.
Available for code and phase fixed solutions. The
current 3D coordinate quality of the computed posi-
tion.
Available for autonomous solutions. The current
PDOP of the autonomous solution.
Description
The bearing from the direction of the orientation to the
point to be staked seen from the current position.
Horizontal distance from the current position to the
point to be staked.
GPS1200+
1083
Advertisement
Table of Contents
