COGO
Step
Description
The calculated distance between the known point and the current
position is indicated.
SHIFT QUIT (F6) does not store the calculated results and exits
COGO calculation.
6.
STORE (F1) to store the result.
For <Write Logfile: Yes> in COGO Configuration, Logfile page the
result is written to the logfile.
7.
Are more inverse COGO calculations to be made?
•
If yes, repeat steps 2. to 7.
•
If no, continue with step 8.
8.
SHIFT QUIT (F6) to exit COGO calculation.
GPS1200+
Refer to
chapter
824