42.6.2
Description
Diagram
Requirements
Reference Line
Working Example
This chapter does not apply for staking to polylines.
Application:
Reference line/arc:
Working technique:
d1
P1
TPS12_132
•
The reference arc is already defined and saved in a job.
•
<Write Logfile: Yes> in REFLINE Configuration, Logfile page.
•
A real-time reference is running.
A curb is to be defined using offsets from the centreline of a road
that is being built.
The defined centre line of the curve is used as a reference arc.
Real-time kinematic.
P0
d2
P0 Start point
P1 End point
d1
d2
GPS1200+
<Along Arc:>
<Stake Offset:>
1086