11.4
Requirements
Activate quick coding
Coding
Quick Coding
•
The job codelist contains quick codes for points, lines and/or areas.
•
According to the requirements of the used CAD package, set <Rec Free Code: Before
Point> or <Rec Free Code: After Point> in CONFIGURE Coding & Linework.
The current setting for <Quick Code:> in CONFIGURE Coding & Linework determines
how quick coding is activated. Quick coding can be activated at any time.
•
For <Quick Code: On> in CONFIGURE Coding & Linework
Quick coding is active and can be used.
•
For <Quick Code: Off> in CONFIGURE Coding & Linework
Press a hot key configured to switch between <Quick Code: Off> and <Quick Code:
On> in CONFIGURE Coding & Linework. Refer to "6.1 Hot Keys" for information on
hot keys.
OR
Press USER. Refer to "6.2 USER Key" for information on the USER key.
OR
Tap the quick coding icon.
OR
Access CONFIGURE Coding & Linework and change the setting manually. Refer to
"19.3 Coding & Linework".
•
For <Quick Code: Never> in CONFIGURE Coding & Linework
Access CONFIGURE Coding & Linework and change the setting manually. Refer to
"19.3 Coding & Linework".
GPS1200+
249