Table of Contents
Advertisement
NTRIP via Internet
Step
Description
•
First column MountPoint:
The abbreviations for the MountPoints.
•
Second column Identifier:
The city where the MountPoint is located.
Highlight a MountPoint about which more information is required. This information
helps to configure the receiver to use the selected MountPoint as a reference.
11.
INFO (F3) to access CONFIGURE MountPoint: XX.
12.
CONFIGURE MountPoint: XX, General page
<Format:> The real-time data format sent out by the MountPoint.
<FormatDet:> Details about <Format:>, for example the RTCM message types
including update rates in seconds displayed in brackets.
<Authentic:> The type of password protection required for the authorisation to the
NTRIP Server. <Authentic: None> if no password is required. <Authentic:
Basic> if the password need not be encrypted. <Authentic: Digest> if the pass-
word must be encrypted.
<NMEA:> Indicates if the MountPoint must receive GGA NMEA data from the
rover in order to compute VRS information.
<Charges:> Indicates if charges are currently made for the connection.
<Carrier:> The type of carrier message sent out.
<System:> The type of satellite system supported by the MountPoint.
13.
PAGE (F6) to access CONFIGURE MountPoint: XX, Location page.
14.
CONFIGURE MountPoint: XX, Location page
GPS1200+
777
Advertisement
Table of Contents
