Leica GPS1200+ Technical Reference Manual page 260

Coding
Step Description
Code blocks are stored in the job.
1. Refer to paragraph "Accessing Job Management" to access
MANAGE Edit Job: Job Name, Codelist page.
<Codelist:> If codes had been copied from a System RAM codelist,
the name of the codelist is displayed. If codes have been typed in,
then the name of the active job is displayed.
2. SHIFT EXPRT (F2) copies codes and code blocks from the job to an
existing or new codelist.
To create a new codelist refer to "Creating/Editing a Codelist".
Copying code blocks to an existing codelist overwrites the code
blocks of the existing codelist.
3. STORE (F1) to save the currently active job and return to MANAGE
Job (Device).
4. Create a new job and assign the related codelist to the job.
SmartCodes from the codelist are now available within the new job.
To create a new job refer to "Creating a New Job".
GPS1200+
Refer to
chapter
8.2
10.4
8.3
260