Code Block - Leica GPS1200+ Technical Reference Manual

11.5.3
Requirements
SURVEY
Survey: Job Name,
SCode page
Creating a Code Block
step-by-step
Coding

Code Block

• <Use SCodes: Yes> in SURVEY Configuration, SCode page.
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step Description
1. Refer to paragraph "Accessing Survey" to access SURVEY Survey
Begin.
2. CONT (F1) to access SURVEY Survey: Job Name.
OCUPY (F1)
To start recording positions. The position mode
icon changes to the static icon. (F1) changes to
STOP. The highlighted code is stored with the
point.
CODES (F3)
To select a code from MANAGE Select Code
panel.
PAGE (F6)
To change to another page on this screen.
GPS1200+
Refer to
chapter
45.1
258