Configuration Set For Real-Time Rover Operations - Leica GPS1200+ Technical Reference Manual

14.3.5
Description
Configuration step-by-
step
Manage...\Configuration Sets

Configuration Set for Real-Time Rover Operations

Configuring the receiver for real-time rover operations.
Real-time rover operations are possible with a GX1230+ or a GX1230+ GNSS. It provides
real-time to centimetre level.
In order to use a GX1210+, a GX1220+ or a GX1220+ GNSS for real-time rover operations,
the RTCM v3 option must be activated. A GX1210+, GX1220+ or GX1220+ GNSS provides
DGPS to 0.25 - 1 m level.
The following table provides recommendations for the most common settings. For all other
fields, the default settings can be used. Refer to the stated chapter for more information on
individual screens.
Step Description
1. Refer to "14.3 Creating a New Configuration Set". Follow the instruc-
tions in paragraph "Configuration step-by-step" up to step 7.
2. CONFIGURE Real-Time Mode
<R-Time Mode: Rover>
<R-Time Data: Leica>
ROVER (F2) configures additional rover station options such as using
a reference network.
DEVCE (F5) to configure devices.
3. CONT (F1)
GPS1200+
Refer to
chapter
22.3.4
22.3.4
23.2
332