Table of Contents
Advertisement
40.3
Access step-by-step
Determine Coordinate System - Normal
Updating a Coordinate System
Step
Description
1.
Refer to "39.2 Accessing Determine Coordinate System" to access DET C SYS
Determine Coord System Begin.
2.
Select <Method: Normal>.
3.
Enter the name of a coordinate system in <Name:>.
OR
CSYS (F6) to select a coordinate system.
4.
CONT (F1) to access DET C SYS Step 3: Match Points (n).
5.
All the following steps are identical with the determination of a new coordinate
system from DET C SYS Step 3: Match Points (n) onwards.
Refer to "40.2 Determining a New Coordinate System". Follow the instructions
from paragraph "DET C SYS Step 3: Match Points (n)" onwards.
GPS1200+
973
Advertisement
Table of Contents
