Config...\Interfaces... - Controlling Devices
Step
Description
<Channel:> The radio channel. The channel used must be within
minimum and maximum allowed input values. The minimum and
maximum allowed input values for a radio depend on the number of
channels supported by the radio and the spacing between the chan-
nels.
<Actual Freq:> Available for <Radio Type: Satelline 3AS>.
Displays the actual frequency of the radio.
Type in the radio channel.
SCAN (F5) Provides information such as the station ID, latency and
the data format of incoming signals from reference stations broad-
casting on the same radio channel. This information can be used to
select appropriate reference stations to dial.
5.
CONT (F1) returns to CONFIGURE Interfaces screen.
GPS1200+
Refer to
chapter
24.9
608