Exporting Data From A Job To A Custom Ascii Format - Leica GPS1200+ Technical Reference Manual

16.3
Description
Requirements
Access
Export data step-by-
step
Convert...\Export Data from Job

Exporting Data from a Job to a Custom ASCII Format

The settings on this screen define the data that is converted and exported and what format
is used.
Data is exported from the selected job. Currently active view, filter and sort settings are
applied. The points that are exported are those that are visible in MANAGE Data: Job
Name.
At least one format file was created using LGO and has been transferred to the System RAM.
Refer to "16.2 Accessing the Data Export Functionality" to access EXPORT Export ASCII
Data from Job.
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step Description
1. EXPORT Export ASCII Data from Job
<Export To: CF Card> or <Export To: Internal Memory>
<Directory:> Available for <Export To: CF Card>. The data can be
exported to the \Data, the \GSI or the root directory. Data must be
stored to the \GSI directory in order to read it in a TPS1100. For
<Export To: Internal Memory>, the data is always exported to the
\Data directory.
GPS1200+
Refer to
chapter
348