Table of Contents
Advertisement
13.5.2
Access
Create a transformation
step-by-step
Manage...\Coordinate Systems
Creating a New Transformation
Classic 3D transformations can be created.
Refer to "13.5.1 Accessing Transformation Management" to access MANAGE Transforma-
tions.
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step
Description
1.
In MANAGE Transformations highlight a transformation. A copy of
this transformation is taken for further configurations.
2.
NEW (F2) to access MANAGE New Transformation.
3.
MANAGE New Transformation, General page
<Name:> A unique name for the new transformation. The name may
be up to 16 characters long and may include spaces.
<Type:> Output field. No other transformations than Classic 3D can
be created.
Enter a name.
4.
PAGE (F6) changes to the Parameters page.
5.
MANAGE New Transformation, Parameters page
Enter the known values of the transformation parameters.
6.
PAGE (F6) changes to the More page.
GPS1200+
Refer to
chapter
39.1
297
Advertisement
Table of Contents
