Table of Contents
Advertisement
Configure coding
Coding
Coding
Characteristic
method
Selection of the codes Shortcuts must be assigned to codes in the job
Recording of the
codes
Refer to "19.3 Coding & Linework" for information on configuring coding.
Description
codelist. <Quick Code: On> must be set in
CONFIGURE Coding & Linework. Typing the
shortcut searches for the assigned code. Point occu-
pation begins.
•
For thematical codes:
Together with the objects. With <Auto STOP:
Yes> and <Auto STORE: Yes>, the points and
codes are immediately stored.
•
For free codes:
Stored as time related information before or after
the points. A time stamp is stored with each free
code.
Quick codes must be created in LGO.
Characters that can be assigned to quick codes are:
•
0 to 9
•
A to Z, not case sensitive
•
a to z, not case sensitive
GPS1200+
235
Advertisement
Table of Contents
