Leica GPS1200+ Technical Reference Manual page 495

Geodetic satellite receiver
Hide thumbs Also See for GPS1200+:
Table of Contents

Advertisement

Config...\Interfaces... - General
Field
Option
Automatic SBAS,
EGNOS, WAAS,
MSAS, EGNOS
(Test), WAAS
(Test) or GAGAN
<Port:>
Bluetooth x
Clip-on
NETx
Port x
<ID Address:> Output
Description
Wide Area Augmentation System
European Geostationary Navigation Overlay Service
MTSAT Satellite-based Augmentation System where
MTSAT stands for Multi-functional Transport SATel-
lite
GPS Aided Geo Augmentation Navigation.
Available for RX1250. The Bluetooth port which will
be used for the interface functionality.
Available for RX1250. The clip-on-contacts. It is used
for RX1250 with GHT56 when a device is attached to
the GHT56.
Available for an activated Internet interface. If these
ports are not assigned to a specific interface, then
these ports are additional remote ports.
The physical port P1, P2 or P3 on the instrument to
which the device is attached.
Available on RX1250 with <Port: Bluetooth x> and
a Bluetooth device being selected.
The ID address of the SmartAntenna to be used.
GPS1200+
495

Advertisement

Table of Contents
loading

Table of Contents