Table of Contents
Advertisement
Manage...\Data
Step
Description
<Pts to Store:> The type of points which are used to form the line
during a survey. Select between all points, measured points, auto
points and offset points of type 1 or 2.
<Line Style:> This is the line style in which lines/areas are repre-
sented in MapView and LGO. For <Line Code: <None>> on the
Code page a line style can be selected from a choicelist. Otherwise
the line style as defined for the selected line code is shown.
Type in a number for the line, select the points to be stored with the
line and select a line style if necessary.
6.
PAGE (F6) changes to the Code page.
7.
MANAGE New Line, Code page
The setting for <Thematc Codes:> in CONFIGURE Coding & Line-
work determines the availability of the subsequent fields and
softkeys.
•
For <Thematc Codes: With Codelist>:
The codes from the job codelist are used.
<Line Code:> All line codes of the job codelist can be selected.
The description of the code is shown as an output field.
The line style is shown as defined for the selected line code. It is
the style in which lines/areas are represented in MapView and
LGO. For <Line Code: <None>>, it can be changed.
The attributes are shown as output, input or choicelist fields
depending on their definition.
GPS1200+
Refer to
chapter
46.1, 46.4
19.3
188
Advertisement
Table of Contents
