Table of Contents
Advertisement
Manage...\Data
Step
Description
<Start Time:> and <Start Date:> The time/date when the line was
created.
A line cannot be renamed to an already existing line ID.
MORE (F5) displays <End Time:> and <End Date:>. This is the
time/date when the last point was added to the line. This can be
different to the time the point was created. The values do not change
after deleting the last added point or after editing unless an additional
point is added to the line.
6.
PAGE (F6) changes to the Points page.
7.
MANAGE Edit Line: Line ID, Points page
All points belonging to the line are listed. The point that was added
last to the line is at the top of the list.
ADD (F2) Accesses MANAGE Select Point with the Points and Map
page. To add an existing point from the active job to the line. A new
point is added above the point which was highlighted when ADD (F2)
was pressed.
EDIT (F3) edits the highlighted point.
REMOV (F4) removes the highlighted point from the line. The point
itself is not deleted.
MORE (F5) displays information about the point codes if stored with
the line, the time and the date of when the line was stored, the 3D
coordinate quality, the class and the flag for Linework.
GPS1200+
Refer to
chapter
9.2
9.3.3
9.3.1
192
Advertisement
Table of Contents
