Table of Contents
Advertisement
Config...\Instrument Settings...
Description of fields
Field
Option
<GLONASS:>
Yes or No
<Galileo:>
Yes or No
<GPS L2C:>
Automatic or
Always Track
<GPS L5:>
Yes or No
<Cut Off
User input
Angle:>
<Loss of
Beep & Message
Lock:>
or No
Beep/Message
<SV Health:>
Description
Available for GX1230+ GNSS/ATX1230+ GNSS/
GX1220+ GNSS/GRX1200+ GNSS.
Defines if GLONASS satellite signals are accepted by
the receiver when tracking satellites.
Available for GX1230+ GNSS/ATX1230+ GNSS/
GX1220+ GNSS/GRX1200+ GNSS.
Defines if Galileo satellite signals are accepted by the
receiver when tracking satellites.
Not available for GX1210+.
Defines if the L2C signal will be tracked. The recom-
mended setting is Automatic.
Available for GX1230+ GNSS/ATX1230+ GNSS/
GX1220+ GNSS/GRX1200+ GNSS.
Defines if the GPS L5 signal will be tracked.
Sets the elevation in degrees below which satellite
signals are not recorded and are not shown to be
tracked. Recommended settings:
•
For real-time: 10°.
•
For purely post-processing applications: 15°.
Activates an acoustic warning signal and a message
given by the receiver when satellites are lost and
therefore no position can be computed.
Sets the satellite tracking behaviour.
GPS1200+
435
Advertisement
Table of Contents
