Table of Contents
Advertisement
Reference Line
Field
Option
PC, PT, AP,
RP, MCP
ALL
<Auto Incrment:>
<None:>
Previous
Next
<Ref. Tangent:>
Back or
Forward
<Densify Arc:>
Yes or No
<Small Radius:>
User input
<Curve Inc.:>
User input
Description
Only these horizontal key points are calculated for
staking, skipping the angle bisector point.
All horizontal key points are available for stakeout.
Refer to "42.8.4 Staking Operation" for a list of all
keypoints.
Sets behavior of the chainaging after a point is
stored.
Does not change the chainage after a point is stored.
Proceeds to the next key point down chainage after
each stored staked point.
Proceeds to the next key point up chainage after
each stored staked point.
Sets the tangent to be used when staking items in
void areas.
Option to use a different chainage increment along a
curve.
Available for <Densify Arc: Yes>. Defines the
threshold value of a small radius curve, for example
curve of radius smaller than this value uses the
chainage increment defined in the following field.
Available for <Densify Arc: Yes>. Chainage incre-
ment to be used along the small radius curve.
GPS1200+
1035
Advertisement
Table of Contents
