Table of Contents
Advertisement
Config...\Interfaces... - General
Field
Option
From 0 to 31
From 0 to 1023
From 0 to 4095
<Time
Yes or No
Slicing:>
<Used Ref
2, 3 or 4
Stations:>
<Time Slot:>
2, 3 or 4
The contents of the
choicelist depend
on the settings for
<Used Ref
Stations:>.
<End of
Nothing or CR
Message:>
Description
For <R-Time Data: Leica> and <R-Time Data:
CMR/CMR+> in CONFIGURE Real-Time Mode.
For <RTCM Version: 1.x> and <RTCM Version:
2.x>.
For <R-Time Data: Leica 4G> and <R-Time Data:
RTCM v3.1> in CONFIGURE Real-Time Mode.
The possibility to send real-time messages delayed.
This is required when real-time messages from
different reference stations are sent on the same
radio channel. Time slicing works for all device types.
Available for <Time Slicing: Yes>.
The number of reference stations in use from where
real-time messages are sent.
Available for <Time Slicing: Yes>.
The time slot represents the actual time delay. The
number of possible time slots is the number of refer-
ence stations in use. The time delay equals 1 s
divided by the total number of reference stations. If
two reference stations are used, the time delay is
0.50 s. Therefore, the time slots are at 0.00 s and at
0.50 s. With three reference stations, the time delay
is 0.33 s. The time slots are at 0.00, 0.33 and 0.66 s.
To add a Carriage Return at the end of the real-time
meassage.
GPS1200+
487
Advertisement
Table of Contents
