Table of Contents
Advertisement
STATUS
Real-Time,
General page
STATUS
Description of fields
Field
Description
R-Time Data
The received real-time data format message type.
<GPS Used
The number of satellites on L1, L2 and L5 (when <GPS L5: Yes> config-
L1/L2/L5:>
ured in CONFIGURE Satellite settings) if being used in the current
position solution.
<GLO Used
Available for GLONASS receivers when <GLONASS: Yes> is config-
L1/L2:>
ured in CONFIGURE Satellite settings. The number of satellites on L1
and L2 being used in the current position solution.
CONT (F1)
DATA (F4)
REF2 (F5) and REF1 (F5)
PAGE (F6)
GPS1200+
To exit STATUS Real-Time.
To view the data being received. Depending on
<R-Time Data:>, the shown data differ. Refer
to paragraph "STATUS Real-Time Input Data".
Available for <R-Time Mode: Reference> with
two real-time devices configured.
To change between the status information for
both real-time devices.
To change to another page on this screen.
685
Advertisement
Table of Contents
