Table of Contents
Advertisement
CONFIGURE
Additional Rover
Options,
General page
Config...\Interfaces... - General
Next step
IF additional rover
options
are not to be config-
ured
are to be configured
The available fields depend on the selected <R-Time Data:> in CONFIGURE Real-Time
Mode.
THEN
CONT (F1) closes the screen and returns to the screen from where
CONFIGURE Real-Time Mode was accessed.
ROVER (F2). Refer to paragraph "CONFIGURE Additional Rover
Options, General page".
CONT (F1)
GGA (F4)
GETID (F5)
GPS1200+
To accept changes and return to the screen
from where this screen was accessed.
To activate the sending of a GGA message for
reference network applications. Refer to
"22.3.7 Configuration of GGA Message
Sending for Reference Network Applications".
Available for <Accept Ref: User Defined>.
To display and select the station ID of the avail-
able reference stations, the latency of the
message and the data format. When using
radios, the radio channel can be switched and
the stations received on the new frequency are
displayed.
497
Advertisement
Table of Contents
