Table of Contents
Advertisement
22.4
22.4.1
Description
Access
Next step
Config...\Interfaces... - General
ASCII Input
Overview
The ASCII Input interface receives ASCII messages from third party devices such as depth
sounders, barometers, digital cameras, pipe detectors, Geiger counters, etc. The ASCII
messages are stored as point annotations together with the next manually occupied point
and/or auto point. After receiving the ASCII message, a reply can be sent back to the device
as confirmation.
The settings on this screen define the port and the device to be used and the type of ASCII
messages to be written to individual annotations.
Select Main Menu: Config...\Interfaces.... Highlight ASCII Input. EDIT (F3).
IF the task is to
THEN
configure the
ASCII interface
Refer to "22.4.2 Configuration of an ASCII Input Interface".
annotations
Refer to "22.4.3 Configuration of Annotations".
reply command
Refer to "22.4.4 Configuration of a Command to the Device".
GPS1200+
516
Advertisement
Table of Contents
