Event Input - Leica GPS1200+ Technical Reference Manual

Geodetic satellite receiver

Hide thumbs Also See for GPS1200+:

Table of Contents

Technical specifica-

Event Input

Config...\Interfaces... - General

The event input is an optional interface requiring a special port.

The event input interface allows pulses which are sent from devices connected to the

receiver to be recorded. These records can later be superimposed on the processed kine-

matic data and the positions where the events took place can be interpolated in LGO. Events

logged during real-time operations can also be exported to an ASCII file using an appropriate

format file. Additionally, a notification message can be output through ports P1, P2, P3, RX

or NET providing information about when the event occurred. A port configured as a remote

port can be used to output the notification message.

For example, in aerial photography, an aerial camera can be connected via the event input

port. When the shutter opens, the position at which the event occurred is recorded.

The settings on this screen define the input port and parameters for the event input option.

This screen is available if the instrument is fitted with a event input port.

Refer to the GPS1200+ User Manual for technical specifications of the event input port and

the required cable.

Select Main Menu: Config...\Interfaces.... Highlight Event Input. EDIT (F3).

This option is not available for RX1250 with SmartAntenna.

This screen consists of two identical pages, one for each event input port. The explanations

given are valid for both pages.