22.12
Description
Access
Config...\Interfaces... - General
PPS Output
The PPS output is an optional interface requiring a special port.
PPS stands for Pulse Per Second. It is a pulse that is output at a specified interval time. This
can be used to activate another device. Additionally, a notification message can be output
through ports P1, P2, P3 or RX when a PPS output occurs.
For example, in aerial photography, an aerial camera can be configured to take a photo each
time it receives a pulse from the receiver.
The settings on this screen define the output port and parameters for the PPS option. This
screen is available if the receiver is fitted with a PPS output port.
Select Main Menu: Config...\Interfaces.... Highlight PPS Output. EDIT (F3).
This option is not available for RX1250 with SmartAntenna.
GPS1200+
559