Table of Contents
Advertisement
MANAGE
Data: Job Name,
Lines (X) page;
MANAGE
Data: Job Name,
Areas (X) page
Manage...\Data
IF
a point is to be edited highlight the point and EDIT (F2). Refer to "9.3.3 Editing a Point".
a line/area is to be
managed
The explanations for the softkeys given below are valid for both pages.
The number in brackets next to the name of the page indicate the number of open
lines/areas. Example: Lines (2)/Areas (2) means that two lines/areas are open.
THEN
PAGE (F6) changes to the Lines (X) and Areas (X) page. Refer to
paragraph "MANAGE Data: Job Name, Lines (X) page; MANAGE
Data: Job Name, Areas (X) page".
CONT (F1)
NEW (F2)
EDIT (F3)
CLOSE (F4) and OPEN (F4)
GPS1200+
To close the screen and return to the screen
from where this screen was accessed.
To create a line/area. After storing the new
line/area, all existing lines and areas which are
open are closed.
To edit the highlighted line/area.
To change between the options in the Open
column of the highlighted line/area.
157
Advertisement
Table of Contents
