Table of Contents
Advertisement
24.4
Description
Configure RS232
connection step-by-
step
Config...\Interfaces... - Controlling Devices
RS232
RS232 is a standard serial communication method that is able to transfer data without the
need for predefined time slots. RS232 can be used, with a Bluetooth housing, to provide a
wireless connection to another Bluetooth enabled device, for example, a computer.
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step
Description
1.
Refer to "22.2 Accessing Configuration Interfaces" to access
CONFIGURE Interfaces.
2.
In CONFIGURE Interfaces highlight an interface which has an
RS232 device attached.
3.
CTRL (F4) to access CONFIGURE RS232 Connection.
4.
CONFIGURE RS232 Connection
<Type:> The type of device highlighted when CONFIGURE RS232
Connection was accessed.
<Bluetooth:> GPS1200+ receivers detect automatically if the
attached devices is bluetooth capable. Some devices ask for the
identification number of the Bluetooth. The identification number of
Leica's Bluetooth is 0000. The field is unavailable for RX1250 with
SmartAntenna.
GPS1200+
Refer to
chapter
23
609
Advertisement
Table of Contents
