Measuring To A Reference Line/Arc; Measure Points - Leica GPS1200+ Technical Reference Manual

42.5
42.5.1
Description
Access
Measure to line - hori-
zontal measurements
Reference Line

Measuring to a Reference Line/Arc

Measure Points

This chapter does not apply for staking to polylines.
The horizontal and vertical position and the chainage of a manually occupied point can be
calculated relative to the defined reference line/arc.
Select the task Measure to XX in REFLINE Reference Task Menu and press CONT (F1)
twice to access REFLINE Measure Points.
OR
Press SURVY (F5) in REFLINE XX Stakeout to access REFLINE Measure Points.
Refer to "42.6 Staking to a Reference Line/Arc" to access REFLINE XX Stakeout.
d2
P0
GPS12_115
P1
P0 Start point
d3
P1 End point
d5
P3
P2 Measured point
P3 Reference point
d1
P2
d1
d4
d2
d3
d4
d5
GPS1200+
<ΔOffset:>
<ΔLine:>
<ΔLine-End:>
<Check Dist 1:>
<Check Dist 2:>
1060