Table of Contents
Advertisement
Convert...\Export Data from Job
Step
Description
<Areas:> Defines if areas are exported.
<Filter:> Defines which points are exported.
PAGE (F6) changes to the DXF page.
<Lines & Areas:> Defines if lines and areas are exported as Line or Polyline enti-
ties.
<LGO Symbols:> Defines if a block is created for each point with the same icons
used in LGO.
<Symbol Size:> Defines the size used for creation of the LGO symbols.
<Dimensions:> Defines the dimension of the DXF file.
<DXF Layer:> Defines the DXF Layer as <Default>, <Code Group>, <Code>,
<Code+Attri> or <Code+Descr+Attri>.
PAGE (F6) changes to the Labels page. The settings on this page define which
labels with information (Point ID, Coords, Height and Pt Code) for each point are
exported. Each label can be exported as separate layer or in the same layer as the
point is exported. For each label the color can be defined and for user defined
labels the DXF layer name can also be defined. Additionally the decimals can be
defined for the Coords and Height label.
2.
CONT (F1) accepts the changes and returns to EXPORT Export DXF from Job.
3.
CONT (F1) exports the data.
Message: Do not remove CF Card!
4.
Information message: Are more data to be exported?
If yes, continue with step 5.
GPS1200+
354
Advertisement
Table of Contents
