Table of Contents
Advertisement
13.4.2
Access
Edit a coordinate
system step-by-step
Manage...\Coordinate Systems
Editing a Coordinate System
The type of transformation of the selected coordinate system determines which elements of
a coordinate system can be edited. The name of the coordinate system, the method of
residual distribution and the geoid model in use are always editable.
For coordinate systems with source RTCM only the geoid model in use can be changed.
Refer to "RTCM coordinate system".
Refer to "13.3 Accessing Coordinate System Management" to access MANAGE Coordi-
nate Systems.
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step
Description
1.
In MANAGE Coordinate Systems highlight a coordinate system to
be edited.
2.
EDIT (F3) to access MANAGE Edit Coordinate System.
3.
MANAGE Edit Coordinate System
The transformation type of the selected coordinate system deter-
mines the availability and the options of the subsequent fields.
Most fields are identical with those for the creation of a new coordi-
nate system. An additional field is:
GPS1200+
Refer to
chapter
13.4.1
292
Advertisement
Table of Contents
