Leica GPS1200+ Technical Reference Manual page 490

CONFIGURE
Real-Time Mode (2)
Config...\Interfaces... - General
Field Option
<Coords:> From 10s to 120s
<Messages:> Choicelist
<Info:> From 10s to 120s
<Msge Type:> Choicelist
Next step
Step Description
1. CONT (F1) closes the screen and returns to CONFIGURE Real-Time Mode.
2. SHIFT RT-2 (F2) changes to CONFIGURE Real-Time Mode (2). Refer to para-
graph "CONFIGURE Real-Time Mode (2)".
Description
The second real-time interface is completely independent from the first one. All settings can
be configured differently. The port that is used must be different to the first real-time interface.
Refer to paragraph "CONFIGURE Real-Time Mode" above for information on the fields and
keys. The difference is, that SHIFT RT-2 (F2) is replaced by SHIFT RT-1 (F2) and returns to
CONFIGURE Real-Time Mode.
Description
Rate for the transmission of reference coordinates.
Available for <RTCM Version: 2.3> in CONFIGURE
Additional Reference Options, General page. The
messages sent within the coordinate message.
Rate for the transmission of reference station infor-
mation such as point ID.
The message type of <R-Time Data: RTCM v3.1>.
<Msge Type: Compact> is suitable for standard
applications.
GPS1200+ 490