Table of Contents
Advertisement
Config...\Instrument Settings...
Field
Option
Automatic
User Defined
Next step
IF satellites used in
the survey
are not to be config-
ured
are to be configured
Description
This setting is remembered when the receiver
is turned off. It is stored as part of the configu-
ration set.
Incoming satellite signals are monitored by the
receiver. Data from signals which are flagged as
unhealthy are neither recorded nor used for real-time
computations.
Satellites must manually be included/excluded from
data recording and real-time computations with
HELTH (F4).
THEN
CONT (F1) closes the screen and returns to the screen from where
CONFIGURE Satellite Settings was accessed.
HELTH (F4). Refer to paragraph "CONFIGURE Satellite Tracking,
GPS page".
GPS1200+
436
Advertisement
Table of Contents
