Selecting Lines And Areas - Leica GPS1200+ Technical Reference Manual

33.7.3
Description
Selecting a line step-by-
step
MapView Interactive Display Feature

Selecting Lines and Areas

Selecting a line or area in the survey mode of MapView is possible using the touch screen.
The functionality of all screens and field are similar for the selecting of a line or area. The
step-by-step instructions for selecting a line using the touchscreen can be applied for areas.
Step Description
1. Select Main Menu: Survey.
OR
Select Main Menu: Programs...\Survey.
OR
Press a hot key configured to access the screen SURVEY Survey Begin.
Refer to "6.1 Hot Keys" for information on hot keys.
OR
Press USER. Refer to "6.2 USER Key" for information on the USER key.
OR
Press PROG. Highlight Survey. CONT (F1). Refer to "37.2 Accessing the
Application Programs Menu" for information on the PROG key.
2. PAGE (F6) until SURVEY XX Survey, Map page is active.
3. Tap on the line to be selected.
When there are multiple lines within the same area and the precise selection is
unclear, tapping on the line will access XX Select Line.
4. Have multiple lines been selected ?
GPS1200+ 759