Table of Contents
Advertisement
Manage...\Data
Step
Description
NORTH (F3) or SOUTH (F3). Available for local geodetic or
WGS 1984 geodetic coordinates when <Local Lat:> or <WGS 1984
Lat:> is highlighted. Changes between North and South latitude.
EAST (F3) or WEST (F3). Available for local geodetic or WGS 1984
geodetic coordinates when <Local Long:> or <WGS 1984 Long:> is
highlighted. Changes between East and West longitude.
SHIFT ELL H (F2) or SHIFT ORTH (F2). Available for local coordi-
nates. Changes between the ellipsoidal and the orthometric height.
4.
PAGE (F6) changes to the Code page.
5.
MANAGE New Point, Code page
The setting for <Thematc Codes:> in CONFIGURE Coding & Line-
work determines the availability of the subsequent fields and
softkeys.
•
For <Thematc Codes: With Codelist>:
The codes from the job codelist are used.
<Point Code:> All point codes of the job codelist can be selected.
The description of the code is shown as an output field.
The attributes are shown as output, input or choicelist fields
depending on their definition.
GPS1200+
Refer to
chapter
19.3
171
Advertisement
Table of Contents
