22.9
Description
Access
CONFIGURE
Meteo Measurement
Config...\Interfaces... - General
Meteo
Meteo devices are used for measuring air pressure, temperature and relative humidity. The
data from the meteo device is logged together with the GPS raw observations. PC based
software can convert the meteo data to a readable ASCII format, e.g. RINEX.
In addition, a binary notification message can directly be output through ports P1, P2, P3, RX
or NET to controlling application software. A port configured as a remote port can be used to
output the notification message. The message contains the meteo measurements obtained
by the receiver from the meteo device.
The settings on this screen define the input port and parameters for incoming meteo meas-
urements.
Select Main Menu: Config...\Interfaces.... Highlight Meteo. EDIT (F3).
This option is not available for RX1250 with SmartAntenna.
The content of the screen is identical with for CONFIGURE Tilt Measurement. Refer to
"22.8 Tilt" for an explanation.
GPS1200+
551