Table of Contents
Advertisement
Determine Coordinate System - General
Description of fields
Field
Option
<Default
Normal or One Pt
Method:>
Localistn
<Default
Onestep, Twostep
Transforma-
or Classic 3D
tion:>
CONT (F1)
FIX (F4) or ADJST (F4)
PAGE (F6)
Description
Method used to determine the coordinate system.
The fields and pages available are different if
<Default Method: One Pt Localistn> is
selected. Refer to "39.3.2 Configuring Deter-
mine Coordinate System - One Point Localisa-
tion" for information on how to configure DET C
SYS using the one point localisation method.
The default transformation to be used when deter-
mining the coordinate system. Refer to "39.1 Over-
view".
GPS1200+
To accept changes and return to the screen
from where this screen was accessed.
Available for Classic 3D page unless <Transf
Model:> is highlighted. To define which
parameters are computed or fixed in the
Classic 3D transformation. Refer to paragraph
"DET C SYS Configuration, Classic 3D page".
To change to another page on this screen.
948
Advertisement
Table of Contents
