Leica GPS1200+ Technical Reference Manual page 544

Config...\Interfaces... - General
Field Option
Permanent
New for Each Pt
<Offset:> User input
Next step
Step Description
1. CONT (F1) returns to CONFIGURE Hidden Point Measurements.
2. CONT (F1) returns to the screen from where CONFIGURE Hidden Point Meas-
urements was accessed.
Description
Applies a default value for the offset angle. The value
is changeable.
Offset angle values must be entered for each new
hidden point.
Available for <EAO Method: Permanent>.
The default value for the offset angle.
GPS1200+ 544