Table of Contents
Advertisement
Field procedure step-
by-step
COGO
Step
Description
1.
Main Menu: Programs...\COGO
2.
COGO COGO Begin
Select a job and a configuration set with the settings mentioned above.
CONF (F2) to configure the COGO application program.
3.
CONT (F1) to access COGO COGO Menu.
4.
Highlight Area Division.
5.
CONT (F1) to access COGO Choose Area to be Divided.
6.
COGO Choose Area to be Divided
<Area to Use: Survey New Area>
<Area ID:> Type in an ID for the new area.
7.
CONT (F1) to access COGO Survey: Job Name.
8.
COGO Survey: Job Name
<Point ID:> Type in a name for the first point of the area.
9.
OCUPY (F1), STOP (F1) and STORE (F1) to survey the first point of the area.
10.
Survey all points belonging to the area. Point 100 must be part of the points.
11.
DONE (F4) once all points are surveyed.
12.
COGO Edit Area: Area ID
Check the points forming the area.
13.
STORE (F1) to store the area and to access COGO Define How to Divide Area.
14.
COGO Define How to Divide Area, Input page
GPS1200+
923
Advertisement
Table of Contents
